Saturday 15 October 2016

DIY - Nano canister filter


With the impossibility of finding a small canister filter on the market, I decided to make one by myself in DIY version.
All needed parts are from Ebay and cost me about $25 total. Most expencive part was Eheim throttle valve which is needed for flow reduction.
Needed parts:



For filter chasing i have used Lock&Lock 350ml storage container. Very solid build and thick wall:



First step - drilling:



This is 12mm to 9mm 1/4BSP thread air pneumatic elbow quick fitting:


Same for the lid:


I have used  DC12V 3m 240L/H ultra quiet brushless motor submersible pump:

 
It is attached to the lid by 10x10 M4 DD type rubber anti vibration mount:




To keep filter material above the intake i have used guard metal mesh for PC computer fan 60mm diameter  AVOID this part, it is not stainless steel - it rust!!! It is better to use some coarse filter material such as ceramic rings as a bottom layer.



Finished product:


I am running this filter on my 1 gallon nano. With reduced flow to 1/3 it doing great job:




25 comments :

  1. do you have links to what u used?

    ReplyDelete
  2. Container: http://www.ebay.com/itm/Lock-Lock-Round-350ml-74-x-110mm-Food-Container-Camping-Hiking-Survival-/321573073661?hash=item4adf3fb2fd:g:YlgAAOSw1XdUWNh0

    Anti vibration mount: http://www.ebay.com/itm/2pcs-New-10-10-M4-M4-DD-Type-Rubber-Anti-Vibration-Mount-silentblock-Base-Block-/111584021747?hash=item19faed0cf3:g:KbwAAOSw0e9UxuvP

    Elbow quick fitting: http://www.ebay.com/itm/12mm-to-9mm-1-4BSP-Thread-Air-Pneumatic-Elbow-Quick-Fitting-Coupler-2-Pcs-/291564198341?hash=item43e29499c5:g:TsoAAOSwGYVXAT8P

    Power adapter: http://www.ebay.com/itm/DC-12V-1A-AC-100-240V-Converter-Adapter-Charger-Power-Supply-EU-Plug-New-F7S-/221925484400?hash=item33abca2770:g:2ykAAOSwAYtWMNYC

    Pump: http://www.ebay.com/itm/DC12V-3m-240L-H-Ultra-Quiet-Brushless-Motor-Submersible-Pool-Water-Pump-Solar-W-/282264268675?hash=item41b842ef83:g:zaQAAOSwo4pYMnEi

    Plug jack adapter: http://www.ebay.com/itm/2-Pcs-Male-Female-2-1x5-5mm-DC-Power-Plug-Jack-Adapter-Connector-Home-Security-Q-/201610214205?hash=item2ef0e7bb3d:g:llsAAOSwxH1UADwe

    Wire guard: http://www.ebay.com/itm/Metal-Wire-Finger-Guard-60mm-CPU-Fan-DC-Fan-Grill-Guard-Protector-for-PC-Silvery-/300701749088?hash=item4603388f60:g:afsAAOxyjNlRy5aq

    Eheim valve: http://www.ebay.com/itm/EHEIM-4003512-9mm-SINGLE-TAP-CONNECTOR-AQUARIUM-FILTER-/172230915792?hash=item2819c336d0:m:m52rWIP3ZeD5THZOq852oZg

    ReplyDelete
  3. For drilling the holes in the container you need 12mm borer.

    ReplyDelete
  4. Hi, Have you used some kind of resin or glue for fixing the elbows to container?

    ReplyDelete
  5. Hello, I have used only Thread seal tape. The elbow is fixed by its thread.

    ReplyDelete
  6. hey thanks for quick reply!
    Do you mean white teflon tape? I also see you have used some kind of black washer in between. I have ordered most of the parts. Thanks for the idea!!

    ReplyDelete
  7. Yes, teflon tape. There is rubber ring, but it is not needed.

    ReplyDelete
  8. Ok great!
    So is this filter still in use? Looks quite efficient, a miniature eheim classic...

    ReplyDelete
  9. Did you silicone the mounts to the lid?

    ReplyDelete
  10. No silicone, it is universal glue. Silicone is not good for gluing plastic.

    ReplyDelete
  11. Hi, is the water pump still working good? I'm looking for a pump who can work outside the water as well, just like your pump..

    ReplyDelete
  12. Hi, it still working! Quite surprisingly for such a cheap pump. :)

    ReplyDelete
  13. Do you have a youtube video to see it in action pls ?

    ReplyDelete
    Replies
    1. Hi, sorry I don't have a video. At the moment it is not in use.
      Maybe later when setup a new scape.

      Delete
  14. Great information, i have benefited from here, thanks

    ReplyDelete
  15. Dear, which is the size for de pump/pneumatic elbow conection?
    Regards!

    ReplyDelete
    Replies
    1. Hi, I have used 12mm to 9mm 1/4bsp elbow: https://www.ebay.com/p/1444365762?iid=291564198341
      On the pump outlet you should put piece of 9/12 hose and then it fits perfectly.

      Delete
  16. Thanks a lot! Bolbi, yesterday i bought the elbows!

    ReplyDelete
  17. This is brilliant! The only think I would try is to fine a way to use a smaller hose. Do you think the lid would leak with more powerful pump?

    ReplyDelete
    Replies
    1. Hi, I don't know. This was made as small canister filter and this pump is to strong for my needs. I wish I could find smaller one.

      Delete
  18. Really Good tips and advises you have just shared. Thank you so much for taking the time to share such a piece of nice information. Looking forward for more views and ideas, Keep up the good work! Aquarium filter

    ReplyDelete
  19. How are you running a submersible pump dry without damaging it? I thought they needed to be submerged

    ReplyDelete
    Replies
    1. This pump doesn't need to be completely submerged in water. It has a suction side that getting water all the time. The problem ocures when the water supply to the pump is interrupted and the pump runs without water - that doesn't happen here.

      Delete